What is the Difference between Absolute and Incremental Encoders?

Previously, we discussed what an Encoder is
and how it can be implemented in your application.
In this video, we are going to discuss the various types of encoders
and which encoder may be used for which function.
before we get started on today's video
if you love our videos, be sure to click the like button below.
then make sure to click subscribe
and the little bell to receive notifications of new RealPars videos.
This way you never miss another one!
There are many types of encoders
but they basically fall into two main sensing techniques.
Those being: Linear and Rotary.
Within those categories, there are differing encoder measurement types
such as absolute and incremental.
There are also various electromechanical technologies
such as magnetic, optical, inductive, capacitive, and laser, to name a few.
There is a plethora of information regarding Encoders
and it may seem hard to wrap your head arounded.
Descriptions like rotary or linear, optical and magnetic, absolute and incremental.
We touch on a few basics to help you understand what’s what and why.
Let’s first break these categories down a little
and explain a couple of the many configurations.
First, the Linear Encoder uses a transducer
to measure the distance between two points.
These encoders can use a rod or a cable
that is run between the encoder transducer
and the object that will be measured for movement.
As the object moves, the transducer’s data collected from the rod or cable,
creates an output signal that is linear to the object's movement.
As the distance is measured,
the Linear Encoder uses this information
to determine the position of the object.
An example of where a Linear Encoder may be used
is for a CNC milling machine
where precise movement measurements are required for accuracy in manufacturing.
Linear Encoders can be “Absolute” or “Incremental” measurements.
We will touch on Absolute and Incremental measurements a little later.
A Rotary Encoder collects data
and provides feedback based on the rotation of an object